-Sinlong profesional mosaico de China y fabricante de vidrio
86-13829956171 kelly28c@126.com
EnglishالعربيةFrançaisDeutschગુજરાતીItalianoPortuguêsРусскийEspañolТоҷикӣTürkçe
 Editar Traducción

Blog

» Blog

¿Cómo produce el vidrio blindado el flujo del borde de vidrio?

2020-05-26

¿Cómo produce el vidrio blindado el flujo del borde de vidrio?

 El cristal separa el viento diáfano., el rendimiento es estable, cada tipo de tipo diferente tiene la característica diferente como resultado de la situación de uso, El alcance aplicable es extremadamente amplio., además del precio de atención, but also should has certain understanding to its type and the performance, enhances strong points and avoid weaknesses, only then can find a more suitable use the material.We will obtain the glass prototype later often to need to carry on certain degree the intensive processing, will cause the glass to have some special functions, thus will satisfy the more operation requirements.Meets down please do understand the armored glass along with me the production process, as well as glass edging concrete step.

primero, ¿Cómo produce el vidrio blindado?

Is same with the simple glass ingredient, es la arena, la lima, el álcali, el vidrio blindado, estaba en el proceso de fabricación muchos procedimientos de trabajo. El vidrio blindado se corta primero el vidrio de recocido ordinario del tamaño solicitado, luego se calienta hasta aproximadamente el punto de ablandamiento cercano 700 grados, luego continúa (El vidrio habitual de 5-6 mm que se obtiene incluso bajo enfriamiento rápido 700 grados altas temperaturas para calentar durante 240 segundos, disminuye la temperatura aproximadamente por 150 segundos.El vidrio de 8-10 mm se calienta durante 500 seconds under 700 degrees high temperatures, disminuye la temperatura aproximadamente por 300 segundos . In brief, is different according to the glass thickness, choice heating temperature decrease time also different).After steel processing the glass surface forms the even compressed stress, but the interior forms the tensile stress, causes the glass anti-curved and the anti-impact intensity can enhance, its intensity is approximately above ordinary annealing glass four times.

The steel has processed the armored glass, cannot again make any processings and so on cutting, grinding or receives damages, but otherwise can because of destroy the even compressed stress balance “to meet a cruel death”. The flow basically is prototype _ _ cuts the __edging (punch/water cutting/and so on) _ _ to clean __ (printing/drying oven) _ the _ steel to form the __packing

The armored glass production quite is complex, individual has no way to produce nearly, the complete set of equipment gets down the expense too to be high, needs the certainly mechanical device.

Segundo, glass edging flow

1S t, el operador de bordes va a trabajar debe usar la cosa de protección, debe usar el guante, usar el caucho. Al moler bloques de vidrio, debe usar el casco de seguridad. Lista de tareas de producción de lectura cuidadosa.

2Dakota del Norte, antes del procesamiento, necesita la revisión seria del tamaño del producto a medio terminar, evita el procedimiento de trabajo, el error continúa continuando, e inspecciona la calidad del aspecto exterior del vidrio, evita las escamas que el rasguño y la molienda no pueden eliminar, carece del ángulo y así sucesivamente.

3rd, inspección, whether should pay attention the half-finished product to the glass to process, like has the crack, then cannot carry on the edging processing, avoids to the equipment, the personnel causing the damage.

4th, takes the glass to have from outside to inside to uncover takes inside, cannot pull out takes random glass.

5th, to the outward appearance quality requirement very high high-quality goods glass, should surpass or the identity automobile level glass prototype quality outward appearance request to the outward appearance quality testing.

6th, grinding quantity control: 8mm following grinding quantity ﹤2.5mm,10-19mm grinding quantity ﹤1.5mm;

Input speed: 8mm following speed ﹤2.5m,10-19mm speed ﹤1.5m.

7th, machine for edging every day starting and engine off, the operators all must achieve the routine inspection, the consultation content including the emery wheel whether becomes less crowded, the attrition degree, the circulating water whether clean and so on. When grinding different thickness glass, must carry on tries the grinding.

8th, doltish glass grinding, the page layout surpasses 3㎡, must use raises the hook and the sucker, the multi-people lift on the glass when the machine for edging cannot move, walks the step to have to be consistent.

9th, should carry on the inspection, el ajuste, the adjustment every day to the emery wheel. The circulating water should maintain cleanly, the circulating pipe must maintain unimpededly, must achieve trades the water industriously.

10th, replaces the emery wheel to have to operate the edge to be able to process the product.

11th, between the grinding quantity and the input speed, must match reasonably, in order to avoid breakage glass.

12th, carries on the inspection after the edging glass in the outward appearance size and the quality, the unqualified product does not flow in the evil ways working procedure.

13th, the different shape edging must act according to the customer the request, strictly processes according to the model or the geometric figure, causes the grinding surface to be smooth, to be bright and clean.

14th, grinding, must the even grinding, make an effort not to be able too to be fierce, in order to avoid breaks by rubbing the glass.

15th, the edging glass, to requests the specially strict high-quality goods glass folds puts when to have to add the isolation paper.

16th, edging glass stack: When specification (long * width) different, debe agregar el papel por un lado y por otro lado el punto de interfaz para aislar (papel aproximadamente 100㎜ * 200㎜ o cuerda), guardias contra el cristal para rayar.

Tal vez como también